Portable power, explained clearly.Compare every model
Shop
Back to all use cases

Use-case guide · Tools

Take AC power to the work, not the other way around.

Run demolition hammers, concrete breakers, cutoff saws and multiple chargers where grid power is unavailable.

  1. 01 · OutputStart every device you need.

    Check continuous watts and startup surge before choosing a configuration.

  2. 02 · RuntimeKeep essentials on for the planned window.

    Use average load and usable watt-hours to plan the required capacity.

  3. 03 · RecoveryHave a recharge plan.

    Use AC when available and solar to extend time away from an outlet.

05 · ToolsG7200 Pro / G9600 Ultra

Recommended path

Take AC power to the work, not the other way around.

Run demolition hammers, concrete breakers, cutoff saws and multiple chargers where grid power is unavailable.

What this setup is for

Demolition hammerConcrete breakerCutoff sawMultiple chargers

Power decision

Output
3.3kW per independent inverter channel
Runtime
Use duty cycle—not nameplate watts alone—for work time
Recharge
Fast AC recovery between shifts; solar for idle-time top-up
Start here

G7200 Pro provides two independent 3.3kW inverter channels; G9600 Ultra raises total output to 9.9kW across three channels. Check each tool’s rated and startup demand per channel.

Open full scenario guideCompare recommended modelsBuy from official store

Next step

Compare the configurations that fit this job.

Compare modelsExplore G Series